TESY IWH 35 X02 KIH Instantaneous Water Heater, 3.5 kW, with Ceramic Faucet
Hot water at the kitchen sink the moment you open the tap, with no tank and no waiting.
The TESY IWH 35 X02 KIH instantaneous water heater from the InstaLine Kitchen range heats water as it flows and mounts above the kitchen sink. It comes complete with a single-lever ceramic-cartridge faucet, a power cord with plug and the mounting hardware, so it is ready to use as soon as it is installed.
Instant heating at 3500 W
Hot water output is around 2.9 l/min at a 25 °C temperature rise, enough for washing up and rinsing hands at the sink. Water is heated only while it flows, so there are no standby losses from a storage tank.
Compact 200 x 130 x 76 mm body for above-sink mounting
The unit takes up minimal wall space and stays discreet even in tight kitchens, office kitchenettes and holiday homes. It is an open-outlet (non-pressurised) installation, powered from a standard single-phase 230 V socket via the supplied cord and plug.
Ceramic cartridge in the mixer tap
The included single-lever faucet uses a ceramic cartridge that resists wear and limescale build-up. Operation is mechanical and a light indicator shows when the heater is running.
Energy class A with XXS load profile
Declared annual electricity consumption is 478 kWh for the XXS load profile typical of a kitchen sink. A copper heating element transfers heat to the water quickly.
Specifications
General
TESYBrand
IWH 35 X02 KIHModel
InstaLine KitchenSeries
725923Article No.
Electric instantaneousType
Open outlet (non-pressurised)Installation type
Above sinkMounting
Kitchen sinkApplication
MechanicalControl
Power and supply
3.5 kW (3500 W)Rated power
230 V / 50 Hz, single-phasePower supply
AEnergy class
478 kWhAnnual energy consumption
XXSLoad profile
Performance
2.9 l/minFlow rate at Δt 25 °C
Dimensions
20.0 cm (200 mm)Height
13.0 cm (130 mm)Width
7.6 cm (76 mm)Depth
In the box
Single-lever faucet with ceramic cartridge, power cord with plug, mounting hardwareIn the box